• Taft Diamond Burs Straight Cylinder SF-13 medium grit FG shank dental bur
1 1

Taft Dental Supply

Taft Diamond Burs — Straight Cylinder

Taft Diamond Burs — Straight Cylinder

$19.95 USD
$19.95 USD
Sale Sold out
Shipping calculated at checkout.
Size
Grit

Free shipping on all orders over $100.

For questions or bulk orders call 513-580-8414

Diamond Dental Bur, FG Shank

5 Burs Per Pack

Parallel walls, flat floor, no taper. Taft Diamond Burs — Straight Cylinder are designed for straight-sided cuts with a defined floor, from crown sectioning to parallel-wall preparation.

Uniform diameter means the cut you start is the cut you finish, and dual-layer diamond bonding holds that geometry instead of tapering off as the diamond wears.

Key Features:

  • Dual-layer diamond bonding for consistent cutting performance
  • Parallel-wall profile with a flat end for a defined floor
  • Available in coarse grit (green band) for fast sectioning and medium (blue band) for standard prep
  • High concentricity for vibration-free operation
  • Friction grip (FG) shank — fits all standard high-speed handpieces
  • 5 burs per pack

Sizing

SF-12 — Flat End Cylinder / SF shape

  • Head: 1.4 × 8.0 mm | Total Length: 22.0 mm

SF-13 — Flat End Cylinder / SF shape

  • Head: 1.6 × 8.0 mm | Total Length: 22.0 mm

Free shipping on orders over $100 and free shipping on all subscriptions

View full details

WHY DUAL-LAYER

These aren't single-use burs. That's the whole point of the second layer.

Most low-cost diamonds are electroplated — one layer of diamond bonded to the shank. When that layer wears, the bur is done. It's disposable by design, and priced like it. Ours are built the other way.

A single-layer bur doesn't quit on you. It fades.

The grit rounds off, the cut goes shallow, and you compensate without deciding to. More pressure. More passes. Longer at the margin. That's bur drift, and on single-layer diamonds it starts early in the pack.

Dual-layer bonding puts a second bed of diamond under the first. As the outer layer wears, fresh cutting surface is already there. More usable life per bur, and a consistent cut across that life, so the last prep feels close to the first.

We spec them this way because a bur that cuts the same on Thursday as it did on Monday is what protects your prep quality and your chair time.

Single-layer (electroplated)
Taft dual-layer
One bed of diamond, bonded once
Two bonded layers of diamond
Cuts hard, then fades fast
Fresh cutting surface underneath
Built to be thrown away
Built to be used, sterilized, and used again
You feel the drop-off mid-pack
Consistent feel across the bur's life

Reusable. Sterilizable. FG shank, fits every standard high-speed handpiece you own. Five per pack, direct-to-dentist pricing — because you're skipping the distributor, not the construction.

Frequently Asked Questions

Our burs use dual-layer diamond bonding — the same construction spec used by premium-tier bur manufacturers. We source direct and sell at margins that distributors can't match. Try a kit against your current supplier and judge the cut yourself.

Yes. All burs use a friction grip (FG) shank, which fits all standard high-speed handpieces used in US dental practices. No adapter needed.

Bur life depends on a variety of factors. The dual-layer bonding extends cutting surface life vs. single-layer alternatives. If you aren't happy with the cut, let us know.

What's your shipping policy?

Yes. Call 513-580-8414 or email sales@taftdentalco.com for bulk pricing. We work directly with multi-location practices and DSOs.

Use our burs with:

  • Taft Dental crown spreader
1 3

Taft Dental Supply

Crown Spreader

$65.00 USD
$65.00 USD
Sale Sold out
Shipping calculated at checkout.
View full details

Collections